TMT TI-2300, Руководство пользователя

Страница: 10 / 24

10
6. General Function
(1) Zero Function
Use to correct drifted zero value when the scale is unloaded, and motion is
not detected. This function works when
ZERO KEY is pressed, and the
ZERO LAMP is on.
(2) Setting Tare Weight Function
Press the TARE KEY . Then, the scale will memorize the weight of the tare
and will display zero value “0”kg. The
TARE LAMP will be on.
To escape this function, remove everything from the scale, and press the
TARE KEY . Then, the TARE LAMP will be off and this function is
terminated.
* Note : The sum weight of the tare and any item on a scale cannot exceed
maximum capacity.
(3) Hold Function
Automatic Hold Function
(This function works whenever the scale weighs moving things.)
■ Press
HOLD KEY when the scale is empty (Initial Zero State).
■ The weight display will indicate
AH ON
. HOLD LAMP is on.
■ After loading a thing, if the weight turns stable then, a display shows
-----
and average weight will appear.
■ The weight of a loaded thing is displayed.
■ To escape the automatic hold mode, when zero point is on, press
HOLD
KEY . Then, the message of
AHOFF
is displayed and HOLD LAMP is off
and normal weighing mode is reverted.
Manual Hold Function
(Only this function operates when you press a HOLD KEY )
■ Press
HOLD KEY loading a thing.
■ This message of
HOLD
is displayed and sequentially the message of
-----
is shown with appearing the average weight.
■ The weight of a loaded thing is displayed.
■ To escape the manual hold mode, remove everything from a hook, or press
the HOLD KEY . Then, HOLD LAMP will be off and the scale changes from
a hold mode to a normal mode.