TMT Cobble 100, Руководство пользователя

Страница: 11 / 16

GARAGE DOOR OPENERS USER MANUAL
10
4.4 System learning, reset process, and LED display
LED Display Programmable Functions LED Display Programmable Functions
4.5 Programmable function indication led
Start transmitter learning mode. Operation testing
Cleaned all studied transmitter. System Learning Fail.
Set up Open Limit. System Learning Completely.
Set up Close Limit. System setting clear
4.6 How to set the parameter:
Step 1: Press the“Set” key for 3 seconds, the display will show the function code.
Step 2: Choosing the setting by Up and Down keys, after having chosen the indicated item, press the Set key and
enter the setting of this function. The second digit will be shown on the right of the display, indicating the
related function(please refer below chart for details). Using the Up and the Down Keys to choose the setting
function and press the Set key to save.
A. System Learning:
Step1:
Press and hold “RF” and “SET” buttons 3 seconds, the LED display shows “OL” and the motor enters system learning
program.
Step2:
Set up open limit and LED display shows “OL”. Press and hold “UP” or “DOWN” button to raise or descend the door.
When the door moves to the proper open position, press “SET” button.
Step3:
Set up close limit and LED display shows “CL”. Press and hold “UP” or “DOWN” button to raise or descend the door.
When the door moves to the proper close position, press “SET” button.
Step4:
The LED display blinks “GE” continuously. Press “SET” or “A” button of the transmitter to proceed operation testing.
The LED display shows the operation current value in the process and memorizes overcurrent value.
Step5:
The motor opens and closes automatically with full speed. The LED display shows “SO” while the system learning
completes. The LED display shows “SF" while the system learning fails. The LED display will be off after 10 seconds.
Note:
The overcurrent function and flashing light function will be activated automatically after learning process complete.
B. Restore Default Setting:
Press “RF” and “DOWN” buttons for 3 seconds, and the LED display shows “CL” to recover the default settings.
C. Motor current auto-detection
The LED display shows the current consumption of the motor
During the system learning procedure, the control panel will automatically detect
the current consumption from each motor, indicate the resistance level of the gate
whiling the motor operation. If this reading increase instantly or stay in high
reading, please check if any object in between of the gate moving area, and
contact your installer for inspection.