TMT Automation ChowBELL Pro, Руководство пользователя

Страница: 15 / 38

34100-211-A
14
1. Please scan the YELLOW (Add) RFID card.
The scan area shows BLUE light ON with a beep which activates the system for adding the
BLUE (User) RFID card.
2. Scan a BLUE (User) RFID card and the BLUE LED shows ON with a beep which indicates
adding user card successfully.
3. Scan the YELLOW (Add) RFID card AGAIN and the BLUE light goes OFF which deactivates the
pairing mode.
After scanning the yellow (Add) RFID card, the system shows red light with 3 beeps which
indicates activation fail. Please scan the yellow RFID card again.
1. Please scan the RED(Delete) RFID card.
The scan area shows RED light ON with a beep which activates the system for deleting the
BLUE (User) RFID card.
2. Scan a PAIRED BLUE (User) RFID card and the RED LED shows ON with a beep which indicates
deleting user card successfully.
3. Scan the RED (Delete) RFID card AGAIN and the RED light goes OFF which deactivates the
delete mode.
After scanning the red (Delete) RFID card, the system shows red light with 3 beeps which
indicates activation fail. Please scan the red (Delete) RFID card again.
Add RFID cards
Delete RFID cards
1. Press the … icon on the top right
2. Add Extension Controller
3. Select the device icon to match with your control device
4. The output icon show up at your operation page at the bottom part
* Connect the EXIT to the push button terminal of your device to be control through the APP
Exit trigger
1
2
3
4