TMT Automation AMOS Series, Руководство пользователя

Страница: 6 / 20

GARAGE DOOR OPENERS USER MANUAL
5
Chain and index
Inner trolly assy
Assemble the front and middle rail with the
junction, and make sure is located at the middle
of the protruding point.
Assemble the back and middle rail with another junction,
and make sure is located at the middle of the
protruding point.
Remove the nut and the spring in the (4) Front pulley tensioner. Make sure the metal chain is placed in the gap of the
pulley on the two sides. Insert the (2) Front hold bracket against the rail. Use the spring and the nut to adjust the
tightness of the (5) Chain.
Note: Remember to lubricate the front and rear pulley before use.
3.2 Rail assembly
28
28
6
4
2
4
5
Complete
1
2
3
4
4
8
1. The (6) Inner trolly assy and the (5) Chain and index are already in the Rail.
2. Make sure the metal index is on right side of the rail.
3. Fasten the (8) Outer trolly assy on the (6) Inner trolly assy with (18) Screws_4pcs
5
6
5
6
18