UPDATED ON 3/14/17
Step 5: Put bar end cap into the cross bar, shown as the following picture.
Step 6: Put hook into bottom of base, and use a hook screw and washer to fix the
hook, shown as the following picture. (Different size hook and hook screw are
provided in
“
Extra Accessories Pack
”
, please check which fits your car better)
Step 7: To tighten the hook, put a nut into the hole, and use screwdriver to fix it on
the other side of the base. (The screwdriver is NOT included.)
Note: Do not fully tighten hook yet.
