
MPEG-4 wired/wireless IP Camera
3.16.
Safe Mode
If by some abnormal operation, for example, powered off during the critical point
of the upgrade procedure, the IP Camera will enter into the safe mode. In this mode,
you will see the following “Safe mode” page when lo gin into this IP Camera. Please do
the upgrade operation immediately to recover the system. On this safe mode, the IP
Camera can not display the video on the Tview software, but you can still find this
IP Camera on the “Auto search” list.
The steps to recover from “safe mode” are the followings :
1. Use Tview to locate the IP Camera by clicking
the “Auto Search” item on the
Tview software.
2. Login into the web configuration page of the IP Camera.
3. Upgrade the firmware from the “Upgrade” page.
Figure 3-23: Safe mode information page
39
www.tmiro.com
| The mobile video gateway