TMI Products VK68A Скачать руководство пользователя

Страница: 15 / 15

Version-01

Cal.VK68A

[ Note ]

It is not necessary to set the chronograph hands after the battery is exchanged.
If the chronograph hands position are incorrect, following below procedure all the chronograph hands
will be reset to "0" position.

[ Standard measurement ]

・

Press button (A) to start the

chronograph.
The chronograph second

The chronograph hands stop to

All the chronograph hands

hand will start moving.

indicate the elapsed time.

will be reset to "0" position.

Note

The chronograph can measure up to 60 minutes.
The chronograph stops after a measurement for 60 minutes.
*Restart by pushing button (A)

During the chronograph operation, button (B) (reset) can be pushed. There is no problem with the function.

[ Accumulated elapsed time measurement ]

A / A

*Restart and stop of the chronograph can be repeated as many times as necessary by pressing button (A).

HOW TO USE THE CHRONOGRAPH

OPERATION

Button (A)

(START)

Button (A)

(STOP)

Button (B)

(RESET)

START

STOP (Finish)

RESET

( 20 minutes 10 seconds )

Press the buttons in the following order :

( 8 minutes 40 seconds )

( 20 minutes 10 seconds )

STOP

・

Press button (B) to reset the

chronograph.

・

Press button (A) again to

stop the chronograph.

RESET

STOP / RESTART

Press the buttons in the following order :

START

Содержание VK68A
















Результаты поиска

Содержание VK68A

Отзывы:

Похожие инструкции для VK68A

Бренды по названию

Популярные бренды

TMI Products VK68A, Техническое руководство и каталог запасных частей

Результаты поиска

Содержание VK68A

Отзывы:

Похожие инструкции для VK68A

Бренды по названию

Популярные бренды