Version-01
Cal.VK6 Series
(VK63A/67A)
[ Note ]
It is not necessary to set the chronograph hands after the battery is exchanged.
If the chronograph hands position are incorrect, following below procedure all the chronograph hands
will be reset to "0" position.
[ Standard measurement ]
・
Press button (A) to start the
・
Press button (A) again to stop the
・
Press button (B) to reset the
chronograph.
chronograph.
chronograph.
The chronograph second
The chronograph hands stop to
All the chronograph hands
hand will start moving.
indicate the elapsed time.
will be reset to "0" position.
Note
[ Cal.VK63 ]
The chronograph can measure up to 60 minutes.
The chronograph stops after a measurement for 60 minutes.
[ Cal.VK67 ]
The chronograph can measure up to 12 hours.
The chronograph stops after a measurement for 12 hours.
* Restart by pushing button (A).
[ Cal.VK63 / 67 in common ]
*During the chronograph operation, button (B) (reset) can be pushed. There is no problem with the function.
[ Accumulated elapsed time measurement ]
A / A
･･･
B
*Restart and stop of the chronograph can be repeated as many times as necessary by pressing button (A)
( 1 hour 8 minutes 40 seconds )
( 6 hour 20 minutes 10 seconds )
START
STOP / RESTART
STOP
( 6 hour 20 minutes 10 seconds )
RESET
B
START
STOP (Finish)
RESET
OPERATION
14
Button (A)
(START)
Button (A)
(STOP)
Button (B)
(RESET)
HOW TO USE THE CHRONOGRAPH
Press the buttons in the following order :
Press the buttons in the following order :
A
A
A
A
