Version-01
Cal.NE86A
14.How to install hands
Place the movement directly on a flat metal plate or something similar to install the hands.
We recommend the use of movement holder to install hands.
Static weighting
For hands attachment, please use a special equipment.
When the movement receives a strong shock, it may be damaged.
Note: Second / minute / Hour chronograph hands setting
Push button A ( chronograph start )
Push button A ( chronograph stop )
Push button B ( chronograph reset )
After (1)~(3), install the second and hour hands at "12" o'clock,
minute hand at "30"minute position.
Button B
Chronograph reset
Button A
Chronograph start / stop
*Do not reuse the chronograph hands once detached. Please change and use new hands.
Note
During time setting, if the chronograph is started, chronograph minute hands will rotate simultaneously.
This is not a malfunction. Please reset chronograph by pushing button B.
Chronograph hour and minute hands will return to their reset positions.
15.Accuracy measurement condition
Static accuracy : - 15 ~ + 25 second per day
Measurement conditions
Measurement should be done within 10 ~ 60 minutes after fully wound up.
Lift angle : 51 deg
Measurement position :
①
Dial up
②
9 o'clock
③
6 o'clock
Minimum measurement time : 20 seconds
Stabilizing time
Leave the watch for at least 20 seconds to stabilize after you change its measurement position.
(4)
(5)
TECHNICAL GUIDE
20
(1)
(2)
(3)
(4)
(1)
(2)
(3)
Metal plate
