To Replace Oil:
1.Position the pump in the vertical position and
fully retract the hydraulic ram.
2.Open release valve by turning handle
counter-clockwise.
5. Fill the oil case.
KEEP DIRT AND OTHER MATERIAL
CLEAR WHEN POURING.
3.Remove the oil plug.
4. Turn the pump on its side so that old oil
will drain from the oil fill hole.
7. Perform the Air Purge Procedure.
W W W . T M G I N D U S T R I A L . C O M
P 1 4 / 2 0
T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
6. Screw the oil plug.
