OPERATION INSTRUCTIONS
The brush cutter can cut off the tall grass and brush up to 2'' in diameter.
1. Attach the cutter to the toolbar or quick attach mechanism of your skid steer
loader, raise the back of the unit of the ground about 4'' to allow the material to
clear from under the cutting deck as you travel forward.
2. Place the front skid shoes 1-2inches off the ground. This is the preferred
position for cutting grass and heavy vegetation. Never drive your skid steer
loader with the front of the brush cutter tilted to the point your view is
obstructed. Always make sure you can see what you are cutting.
3. Check the work area. Never operate the brush cutter in populated areas
where thrown objects could injure persons or damage property. Never raise the
unit and expose yourself or anyone else to the rotating blades. If you can see
the blades then the back of the unit is raised too high.
4. Activate the auxiliary hydraulics with the engine at idle. Increase engine
speed. Supply the power to the brush cutter, and let the hydraulic motor work.
5. Be sure the rotary cutter is operating smoothly and at full speed, and then
slowly push the skid steer loader forward when the brush cutter monitoring the
blade rotation.
6. Return the engine speed to idle and discharge the auxiliary hydraulics.
Remove the brush cutter from debris.
W W W . T M G I N D U S T R I A L . C O M P 1 0 / 1 3 T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
