TMC
Installation Instructions
Page 7
The casters can be locked so that the wheels cannot
spin and the caster cannot rotate
To Lock the Caster
•
Press down on the bottom tab labeled “ON”on the
locking caster.
To Unlock the Caster
•
Press down on the top tab labeled “OFF”on the
locking caster.
Locking Tab
Computer Shelf Install
•
Remove shelf from packaging.
•
Remove the tie holding the 15-pin VGA, 3.5 mm audio, and
USB control cabling bundle located at the cable access
hole on the rear of the head assembly.
•
Completely remove the rubber grommet from the cable
access hole where the laptop shelf will be installed.
•
Feed the cabling ends through the matching cable access
hole on the laptop shelf, and install the shelf to the rear of
the head assembly via the (3) thumb screws located on the
shelf.
•
Tighten the Phillips head of the thumb screws utilizing a
screwdriver as needed.
•
Feed the cable ends through the rubber grommet and
re-install it into the cable access hole accordingly.
Lock release Tab
Caster Operation
