TMB ProPlex GBS, Быстрый старт

Страница: 4 / 5

Overview
Setup
ProPlex DIN Rail devices use a standard Phoenix MSTB screw terminal connector in various
pin configurations. Please refer to the wiring diagrams below for correct hook up of your
ProPlex DIN Rail product.
1. Connect the 48 VDC power to the power input located in top left corner. The
connector should be wired as depicted in the image below.
2. To use the PoE function:
a. Connect the Ethernet cable with the RJ45 connector to Ethernet ports 1-4
located at the bottom of the unit.
b. When using PoE to pass electric power and data, the switch can provide
up to 15.4 W per output (IEEE 802.3af compliant).
c. Important: The 1 Gbps ethernet port at the top right of the unit does not
support PoE.