background image

Check for parts online at www.HuntRiversEdge.com or call 800-345-6007 M-F 8-5

24

Operator's Manual

LOCKDOWN 21-FT WIDE Ladder Stand

THE ULTIMATE SHOOTING RAIL USE INSTRUCTIONS

FIGURE 15

DE

TAIL A

FIGURE 14

The shooting rail on this stand is unique. It has both up-and-down and 

in-and-out adjustment. It can also be flipped down and tucked away 

into the platform to get it out of the way for bow hunting.

SHOOTING RAIL ADJUSTMENT

1.  To adjust the shooting rail up or down, simply loosen the two 

knobs, slide them up or down in the slots to the desired height, 

and tighten them back up. SEE FIGURE 14.

2.  To adjust the shooting rail in or out, simply release the two clamp 

levers and slide the shooting rail to the desired position. Then, 

lock in place by flipping the levers back down. SEE FIGURE 14.

SHOOTING RAIL TUCKED-AWAY

3.  To flip the shooting rail down and tuck it away into the platform, 

first flip it up over your head and let it rest against the tree. 

4.  Then, loosen the two knobs and slide/rotate them down in the 

slots and out of the way. SEE FIGURE 15 AND DETAIL A.

5.   Then, flip the shooting rail down in front of you and release the 

two clamp levers. Flip it all the way down and slide it into the 

slot in the platform. Then lock in place by flipping the levers back 

down. SEE FIGURE 15.

Содержание Rivers Edge LD200





























Отзывы: