TLV VS1C Скачать руководство пользователя страница 13

 

172-65392MA-08  (VS1C)    25  Nov  2021

 

12

 

TLV EXPRESS LIMITED WARRANTY 

Subject to the limitations set forth below, TLV CO., LTD., a Japanese corporation 
(“

TLV

”), warrants that products which are sold by it, TLV International Inc. (“

TII

”) or 

one of its group companies excluding TLV Corporation (a corporation of the United 
States of America), (hereinafter the “

Products

”) are designed and manufactured by 

TLV, conform to the specifications published by TLV for the corresponding part 
numbers (the “

Specifications

”) and are free from defective workmanship and 

materials. The party from whom the Products were purchased shall be known 
hereinafter as the “

Seller

”. With regard to products or components manufactured by 

unrelated third parties (the “

Components

”), TLV provides no warranty other than the 

warranty from the third party manufacturer(s), if any. 

Exceptions to Warranty 

This warranty does not cover defects or failures caused by: 

1.  improper shipping, installation, use, handling, etc., by persons other than TLV, 

TII or TLV group company personnel, or service representatives authorized by 
TLV; or 

2.  dirt, scale or rust, etc.; or 
3.  improper disassembly and reassembly, or inadequate inspection and 

maintenance by persons other than TLV or TLV group company personnel, or 
service representatives authorized by TLV; or 

4.  disasters or forces of nature or Acts of God; or 
5.  abuse, abnormal use, accidents or any other cause beyond the control of TLV, 

TII or TLV group companies; or 

6.  improper storage, maintenance or repair; or 
7.  operation of the Products not in accordance with instructions issued with the 

Products or with accepted industry practices; or 

8.  use for a purpose or in a manner for which the Products were not intended; or 
9.  use of the Products in a manner inconsistent with the Specifications; or 
10. use of the Products with Hazardous Fluids (fluids other than steam, air, water, 

nitrogen, carbon dioxide and inert gases (helium, neon, argon, krypton, xenon 
and radon)); or 

11. failure to follow the instructions contained in the TLV Instruction Manual for the 

Product. 

Duration of Warranty 

This warranty is effective for a period of one (1) year after delivery of Products to the 
first end user. Notwithstanding the foregoing, asserting a claim under this warranty 
must be brought within three (3) years after the date of delivery to the initial buyer if 
not sold initially to the first end user. 

ANY IMPLIED WARRANTIES NOT NEGATED HEREBY WHICH MAY ARISE BY 
OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE AND ANY EXPRESS WARRANTIES NOT 
NEGATED HEREBY, ARE GIVEN SOLELY TO THE INITIAL BUYER AND ARE LIMITED IN 
DURATION TO ONE (1) YEAR FROM THE DATE OF SHIPMENT BY THE SELLER. 

Exclusive Remedy 

THE EXCLUSIVE REMEDY UNDER THIS WARRANTY, UNDER ANY EXPRESS 
WARRANTY OR UNDER ANY IMPLIED WARRANTIES NOT NEGATED HEREBY 
(INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE), IS 

REPLACEMENT

; PROVIDED: (a) THE CLAIMED DEFECT IS 

Содержание VS1C
















Отзывы: