172-65603MA-08 (SR-B1.5/SR-B4) 5 Oct 2021
6
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing may
damage the product, leading to fluid discharge, which may cause burns
or other injury. If the water seal or inside of the tube freeze, the inside of the
product may be pressurized which could cause problems on equipment
or devices that are connected to the product.
CAUTION
Refer to the product nameplate or submitted drawings for detailed specifications.
Do not install valves or orifices at the exhaust outlet, since the SR-B is an
atmospheric type heat exchanger.
Configuration
SR-B1.5/SR-B4
Appearance
Internal Construction
The figure above shows the SR-
B1.5.
The internal configuration of the
SR-B4 differs slightly from SR-
B1.5.
* Depending on the specifications, the product may or may not feature an overflow outlet for
the exhaust pipe.
