172-65165MA-05 (HR80A) 13 Sep 2021
4
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions that may lead to serious accidents. Local regulations may restrict
the use of this product to below the conditions quoted.
Use only under conditions in which no freeze-up will occur.
Freezing may
damage the product, leading to fluid discharge, which may cause burns or other
injury
Refer to the product nameplate for detailed specifications.
A
Nominal Diameter
B
Valve No.**
C
Maximum Allowable Pressure (PMA) *
D
Maximum Operating Pressure (PMO)
E
Model
F
Production Lot No.
G
Maximum Allowable Temperature (TMA)*
H
Maximum Operating Temperature (TMO)
Minimum Operating Pressure: 0.8 MPaG (115 psig)
Back pressure should not exceed 50% of the inlet pressure
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate
when there are no options.
CAUTION
A
B
C
D
E
F
G
H
