172-65135MA-01 (P46SR + BO2) 1 Oct 2009
1
Contents
Introduction ....................................................................... 1
Safety Considerations ....................................................... 2
Checking the Piping .......................................................... 4
Specifications .................................................................... 5
Configuration ..................................................................... 5
Installation ......................................................................... 6
Maintenance...................................................................... 7
Disassembly / Reassembly ............................................... 8
Troubleshooting .............................................................. 10
Product Warranty ............................................................ 11
Option: With BO2 Blowdown Valve................................. 12
Introduction
Thank you for purchasing the
Thermodyne Steam Trap.
This product has been thoroughly inspected before being shipped from the
factory. When the product is delivered, before doing anything else, check the
specifications and external appearance to make sure nothing is out of the
ordinary. Also be sure to read this manual carefully before use and follow the
instructions to be sure of using the product properly.
The Thermodyne Steam Trap features a bimetal ring for thermostatic air
venting, which allows the quick, automatic discharge of large quantities of
initial air and cold condensate immediately after operation start-up, thereby
greatly reducing start-up time. It also reacts with great sensitivity to the
inflow of large quantities of condensate and hot air during operation,
preventing air binding.
The modular valve seat unit is quickly and easily installed and replaced, thus
greatly reducing the time and labor required for maintenance and repair.
The Thermodyne Steam Trap, with its superior features listed above, in
combination with the proven performance record of the bimetal thermostatic
air vent, increases heating efficiency and reduces manpower requirements for
maintenance and bypass blowdown.
If detailed instructions for special order specifications or options not contained
in this manual are required, please contact
for full details.
This instruction manual is intended for use with the model(s) listed on the front
cover. It is necessary not only for installation but for subsequent maintenance,
disassembly/reassembly and troubleshooting. Please keep it in a safe place
for future reference.
