172-65455MA-03 (JH7RL-B/JH7RM-B) 13 Jul 2015
6
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
DO NOT use the trap in excess of the maximum operating pressure
differential; such use could make discharge impossible (blocked).
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
Model
Maximum Allowable
Temperature (TMA)*
Maximum Allowable
Pressure*
Nominal Diameter
Maximum Differential
Pressure
Production Lot No.
Valve No.**
Maximum Operating
Temperature
* Maximum
allowable pressure (PMA) and maximum allowable temperature (TMA) are PRESSURE SHELL
DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate when there
are no options.
Configuration
* Replacement parts are available only in the following kits:
M = maintenance kit; R = repair kit; F=float
No. Name
M* R* F*
1 Body
2 Cover
3 Float
4 Orifice
5 Orifice Gasket
6 Orifice Plug
7 Orifice Plug Gasket
8 Screen Holder
9 Screen
10 Flange/Socket
11 Cover Bolt
12 Cover Nut
13 Cover Gasket
14 Connector
15 Connector Gasket
16 Snap Ring
17 Air Vent Case
18 Bimetal Plate
19 Air Vent Screen
20
Air Vent Valve Seat
21
Air Vent Valve Plug
22 Snap Ring
23 Nameplate
24 Drain Plug Gasket
25 Drain Plug
