172-65217MA-06 (DC3-H) 7 Oct 2021
4
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
*Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
**Valve No. is displayed for products with options. This item is omitted from the nameplate when
there are no options.
Configuration
15
– 50 mm (
1
/
2
– 2 in)
No.
Name
1
Body
2
Separator Body
3
Cover
4
Separator
5
Body Gasket
6
Cover Nut
7
Guide Pin
8
Body Bolt
9
Cover Bolt
10
Cover Gasket
11
Wave Spring
12
Body Nut
13
Float Cover
14
Float Cover Bolt
15
Spring Washer
16
Nameplate
DO NOT use for toxic, flammable or otherwise hazardous fluids.
This product is a separator for steam or air that separates and
discharges condensate from steam or air piping systems. Use only for
steam, air and/or condensate. This product is for intended use only.
Improper use may result in such hazards as damage to the product or
malfunctions that may lead to serious accidents.
WARNING
Model
Production Lot No.
Maximum Allowable
Temperature (TMA)*
Maximum Operating
Temperature (TMO)
Nominal Diameter
Maximum Allowable
Pressure*
Maximum Operating
Pressure
Valve No.**
Separator
Outlet
Condensate Outlet
Air/Steam Trap
Outlet
Separator
Outlet
Condensate
Outlet
