TLS DCV-300, Руководство пользователя

Страница: 6 / 8

3.0.2 – System Modes
System mode enables different types of control and is set in the system mode menu which is
accessed by pressing the menu button repeatedly to cycle settings.
1. DMX – For DMX control.
2. Sound – For sound auto control.
3. Auto – For running stand alone.
4. Slave – Master Slave mode.
3.0.3 – Changing the DMX address
Cycle menu until the display reads “System Mode” and press “enter”
Once you have accessed this screen and selected the DMX Mode from DMX or WDMX* you can
press “enter” until the screen scrolls along to give you the DMX Addressing settings.
*WDMX (Wireless DMX) only available on select models.
3.0.4 – Changing the LED mode (RGBW/RGB, CCT)
Cycle menu until the display reads “System Mode” and press “enter”
Once you have accessed this screen the display will show a two-digit and a three-digit number, the
first two-digit number shows the mode as follows:
1. RGB
2. RGBW
3. Dual White (1&3 and 2&4 Grouped)
4. All Outputs Operate (1 DMX Chanel)
5. Dim + RGBW
6. RGBW + Dim + Strobe
7. Macro Mode (Described Below) MACCH
8. Assign any DMX address to any channel
3.0.5 – Macro Modes & DMX settings
For LED Mode [07] (listed above)
1. (DMX 000-025) RGB Fade + Speed + Dim
2. (DMX 026-051) RGB Step + Speed + Dim
3. (DMX 052-077) RGBW Fade + Speed + Dim
4. (DMX 078-103) RGBW Step + Speed + Dim
5. (DMX 104-129) RGB Audio Step + Dim + Sensitivity
6. (DMX 130-152) RGBW Audio Step + Dim + Sensitivity
7. (DMX 153-178) Red Speed + Dim
8. (DMX 179-203) Green Speed + Dim
9. (DMX 204-229) Blue Speed + Dim
10. (DMX 230-255) White Speed + Dim