875800 User manual
TLS electronics GmbH Contact: [email protected] 12
(More details please check Page 16 Daisy-Chain Sequence).
4. Connect the HDBT OUT of the last device to the HDBT IN of the first device,
log in WEB GUI of the first device to click Start Sequence again, then Ring-type
connection is set up correctly.
Any Pathfinder reset, removed, replaced or newly added in the chain,
please follow above instruction to configure them again.
Connections and Installation
1. Connect the HDBT OUT port of Pathfinder 1 to the HDBT IN port of
Pathfinder 2, connect the HDBT OUT port of Pathfinder 2 to the HDBT IN
port of Pathfinder 3, and follow to daisy-chain multiple Pathfinder through
HDBT ports by Cat cable.
2. Using quality HDMI/DP/VGA cables to connect different sources (such as
Laptop, PC, Blu-ray, satellite/cable TV, etc.) to HDMI IN/DP IN/VGA IN port
of Pathfinder.
3. Using quality HDMI cables to connect the HDMI display device (such as
Projector, Monitor or TV) to the HDMI OUT of Pathfinder.
4. Connect a controller such as IP-based touch panel to an Ethernet port of
Pathfinder, or Contact Closure-based keypad to the Select/KEY/LED ports
to control. Circuit diagram of Contact Closure ports including SELECT, KEY
and LED (2,5 - 3,3V
– 5 - 8 mA) without any resistors as shown:
5. Power on all devices. Use the Select Button, Contact Closure, WEB GUI or
Telnet API command to operate the Pathfinder.
Note:
Quality CAT cables are highly recommended, such as Cat6, AWG 24/1 or
better, S/FTP cable.
Содержание 875800
Страница 1: ...User Manual 875800 Path 4 0 MF ...
