TLS Electronics QuickControl XL, Инструкция по установке и эксплуатации

Страница: 6 / 60

Installation and user manual
6 Stand 09/17
This operating instructions contains basic notes to be observed when
operating
TLS QuickControl XL . Follow the instructions closely to
avoid errors. It is therefore imperative to read these operating
instructions before working with
TLS QuickControl XL .
The safety notes contained in these instructions that result in hazards
to persons unless observed, are indicated by the
Safety symbol in acc. With DIN 4844-
W8 and the word “Danger”.
Work on electrical components or component groups may only be
performed by a qualified electrician in acc. with electrical regulations
(e.g. EN 60204, DIN VDE 0100/0113/0160).
Plug connections and cables may be destroyed. Connect plugs and
sockets without using force. Do not kink cables when laying; lay with
an adequate radius (R>5 x cable diameter).
Screws, bolts and threads may be damaged. Use suitable tools to
loosen screws and bolts.
Use device indoors only, i.e. not in open air. Never expose the device
to moisture!
C 1.8 Assembly notes