30110 BL HDBaseT Set2
Relens GmbH Contact:
6
Panel Description
Transmitter 40030
①
IR In port --
–3.5mm stereo phone-jack, connect to IR receiver cable
②
I
R Out port
–3.5mm mono phone-jack, connect to IR emitter cable
③
IR selection switch
– Switch to right side (5V) or left side (12V) to select IR
④
HDMI input LED indicator --
Lit if the HDMI input is active.
⑤
HDMI input port
– Connect to HDMI source device, such as DVD, TV box…
⑥
RS232 port--- 1x 3-pin phoenix terminal connector
⑦
Mode DIP Switch --- 2 pin (UP=0, DOWN=1)
00: RS232 pass through
01: Valens firmware upgrade
10: MCU firmware upgrade
⑧
HDBT Output --
RJ45 connector. Connect to HDBaseT input on Transmitter 40030
⑨
Power LED indicator
–
Lit when the unit is powered on successfully.
⑩
Power port
– Used included 12V/2A DC adapter to power the unit
Содержание BL 30110 HDBaseT Set2
Страница 1: ...User manual BL 30110 HDBaseT Set2...
