RF Wireless Receiver
Model TL-Rx-315
Figure 4
Eight button Transmitter (Linx Product):
General purpose remote control
(see note 2 and appendix A)
Four position Circular
DIN Receptacle - DC Power Input,
RS-232 (5V, TTL) Signal Output (see note 1)
Shielded Control Cable
(see note 3)
Mounting Bracket:
Keep Rx 6” clear of
objects
DieCast Aluminum
Shielded Enclosure
Rapid Flashing
Green LED:
Indicates Power “On”
and “Ready” status
Articulating Antenna - ANT-325-CW-HWR-RPS,
1/4 wav monopole, FCC compliant
RP-SMA connector
50 ohms Impedance
PARTS DESCRIPTION
Receiver Package Description:
Figure 4 shows the typical package contents for one TL-Rx-315 RF receiver. It includes an
Antenna, one Transmitter, Shielded Control Cable, Mounting Bracket, and four screws (see Figure 4).
Notes:
1. TL-Rx-315 Output port pin assignments and RS-232 signal output sequence, see Appendix A
2. Compatible transmitters: CMD-KEYx-315xxx, CMD-HHCP-315, CMD-HHLR-315, CMD-HHTX-315 (Linx pre-certified products).
3. Standard control cable is 6 feet. Optional control cable is available up to 400 feet , if > 400 feet cable length required, inquire.
TL-Rx-315 User’s Manual p.3
RF Wireless Receiver
Model TL-Rx-315
Eight button Transmitter (Linx Product):
General purpose remote control
(see note 2 and appendix A)
Four position Circular
DIN Receptacle - DC Power Input,
RS-232 (5V, TTL) Signal Output (see note 1)
Shielded Control Cable
(see note 3)
Mounting Bracket:
Keep Rx 6” clear of
objects
DieCast Aluminum
Shielded Enclosure
Rapid Flashing
Green LED:
Indicates Power “On”
and “Ready” status
Articulating Antenna - ANT-325-CW-HWR-RPS,
1/4 wav monopole, FCC compliant
RP-SMA connector
50 ohms Impedance
SPECIFICATIONS
Operating Power:
Voltage: +5VDC; Current: 7mA
Operating Temperature:
-40 to +70ºC
Reception Frequency:
315 MHz ± 50 KHz
-5
Reception Sensitivity:
-112 dBm (for BER 10 at 1,200 bps)
Reception Range:
Indoor reception is up to 100 feet from transmitter, assuming typical indoor construction materials. Range
without obstructions in the line of sight is up to 1000 feet.
Note:
RF signals will not propagate through solid metal obstructions. The TL-Rx-3l5 will not function if located in shielded area.
Output RS-232
signal:
5V TTL, 19.2K Baud - RS-232 signal transfer range: up to 400 feet
Dimension:
Die-Cast Aluminum Shielded Enclosure: 57 x 35 x 30 mm or 2.23 x 1.36 x 1.13 in
Weight:
0.25 lbs (5 oz) (w/ antenna & mounting bracket)
Mounting Bracket Dimensions (in):
7.5 x 1.75 x 2
Configuration:
The TL-Rx-315 Receiver does not need configuration. When the controlled device is connected, and +5V DC is supplied to the Rx,
the green LED on Rx will rapidly flash to indicate power presence and readiness to receive signals.
Compatible Transmitters
can be configured to have one to eight active button controls. Factory firmware will match Tx keypad to
control requirements of device. Please refer to the Linx Transmitter manual for other specific details.
