Quick instructions for thermosensor CTS-7-PE
Important: At all adjustments at the tuning device which concern the thermosensor it must
be plugged in. If the therosensor is missing, these options are skipped automatically.
1. Test the thermosensor
First the correct function of the sensor should be tested. To
this you are looking for the following adjustment with the menu
control (see chapter 3.0 in the operating instructions):
With a thermometer you check whether the correct temperature is
meassured. If the right value does not match with the actual room
temperature, you enter an correction value with the button pair
"Func" so that the correct room temperature is displayed on the on
the right.
When leaving the menu, the correction value is then stored firmly in the tuning device.
To be able to use the thermosensor, a instrument program must be entered now. In this
instrument program all adjustments will be stored for your application and can be reproduced
again quickly.
2. How to enter the instrument program
In order to produce the instrument program,
with the menu
control
find this indicaton on the display :
Using the “Func“ keys, find, for example, memory number 14
(the last two digits of the menu indication correspond to the
memory number). You can access memory number 9 thru 60..
Now, press the “E” key. On the bottom line of the display a moving
line appears: “Go ahead with “S+F” !“. To go ahead, keep “S”
pressed and tap ”F“ (for memory protection). This indicator appears
on the display:
You now may assign an easily remembered name to the memory.
In the “Menu Control Overview “ delivered with the set you will find a quick reference how to enter
a name(lower right hand side).
In this example we want to change “INSTRUMENT 14” to “PIANO_________14“.
Tap the “Func >“ key several times, until this indicator appears:
Press the “Note >“ key once. After that, tap the “Func >“ key several
times, until this indicator appears on the display:
Press the “Note >“ key once. After that, tap the “Func >“ key several
times, until this indicator appears on the display:
Repeat the above steps as long as you receive the following
indication:
*
TIASTRUMENT____14
*
THASTRUMENT____14
*
THESTRUMENT____14
*
THERMOMENT_____14
*
INSTRUMENT_____14
THERMOSENSOR
korr. 0.0 17.4°C
THERMOSENSOR
korr. 1.0 18.4°C
ENTER INST. 209
INSTRUMENT____09
ENTER INST. 214
INSTRUMENT____14
