Thermosensor for TUNING-SET CTS-7-PE
The mode of operation of thermosensor rate and thermosensor reference are discriped in
the manual of CTS-7.
Working with the Thermosensor
As soon as a Thermosensor rate is less than zero in a intrument programm, the
Thermosensor starts influencing the target frequency setting of the CTS-7-PE. The cent
deviation caused by the Thermosensor and the temperature (degrees in Celsius) are now
displayed automatically before entering the instrument program. The following indicator
appears in the display of the CTS-7-PE:
Thermo Cents !!! go ahead with key E !
(moving display)
After pressing key E for example:
By pressing key “E”, you enter the actual instrument program. The actual cent setting in the
instrument program is not influenced by the cent adjustment of the thermosensor. For the
creation of the target frequency, both values (thermosensor- and actual cent adjustment) are
added up. In the tuning program, the sensor is reanalyzed. The evaluation also occurs during
the recording of a tone at least once per minute
Operation range of the thermosensor: 0°C to 50°C
Temperature messured by thermosensor
Connector for thermosensor
18.2 °C –3.6 cent
Thermosensor cent correction value
