TL Electronic SlimLine PT 1082 Series, Руководство по обслуживанию

Страница: 24 / 119

Chapter 2 Hardware Configuration
Page: 2-7
2-4. CLEAR CMOS DATA SELECTION
JP5 : Clear CMOS Data Selection
The jumper setting is as follows:
SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION
Normal Open
1
-3
Clear CMOS* Close
1
-3
Note: Manufacturing Default is Normal.
*To clear CMOS data, user must power-off the computer and set the jumper to “Clear
CMOS” as illustrated above. After five to six seconds, set the jumper back to “Normal”
and power-on the computer.
2-5. CFAST VOLTAGE SELECTION
JP8 : CFast Voltage Selection
The jumper setting is as follows:
SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION
3.3V 1-2
3 1
-3
5V 2-3
3 1
-3
Note: Manufacturing Default is 3.3V.