- Pin 1 = Ground (screen),
- Pin 2 = Signal Phase (“+” or “hot”),
- Pin 3 = Signal Non-Phase (“-” or “cold”).
Unbalanced Output.
An unbalanced line output is provided for each channel, on a 0.25” mono jack socket.
- Tip = Signal Phase (“+” or “hot”).
- Screen = Ground.
Link connection.
The compressor section stereo link facility is via an unbalanced jack socket. The
mating connector should be wired as:
- Tip = Signal Phase (“+” or “hot”).
- Screen = Ground.
Note: The link signal is a DC control voltage. Do not connect the link socket to an
audio signal connector. It is only suitable for connection to the link socket on another
voice processor.
Mounting.
The voice processor may be free standing, or mounted in a standard 19” rack.
Rear Panel.
The rear panel connectors are identified in fig.3. Make sure that all settings, mains and
audio connections have been made as described above before attempting to operate
the equipment.
