TKS AGRI Conveyor TR, Руководство оператора

Страница: 25 / 46

TKS
25
Fig. 9
3.2 Tightening the belt
It is important that the belt is taut. This should
be checked at regular intervals.
• Before tightening the belt, the bearing must
be loosened at the two locking screws (A) on
both sides.
• The actual tightening is carried out by turning
the tightening screw (B) on both sides of the
return side.
See Fig. 9
NB!
It is important to re-tighten the belt after just one
or two days, as paint etc. can be worn off and
result in slack in the carrier belt.
• Remember to turn the tightening screws on
both sides an equal number of revolutions.
• Run the belt unloaded after tightening to
check that everything works satisfactorily.
B A
IT_10