TKO 522NWG Скачать руководство пользователя страница 13

Страница: 13 / 15

Assembly

ASSEMBLY STEPS

STEP 9

Install the Speed bag support frame assembly (11) to the Right L shaped upright (8).

Attach the T shaped Knob (28) onto the Right L shaped upright (8), Slide the speed

bag support frame (11) thru the tube welded on the Right L shaped upright (8) and

release the Knob until the lock pin is engaged in one hole on the Speed bag support

frame (11). Tighten it securely.

Note. There are 5 holes punched in the Heavy bag support frame (11) for height

adjustments

STEP 10

Install the Left VKR arm rest frame (9) to the Left upright assembly (3&7), using 1

Hex bolts (46), 4 Hex bolts (51), 6 Washers (58), one Large metal plate (23) and 1

Lock nuts (62). Do not use wrench at this time.

Repeat the same procedure for the Right arm rest frame (10) and the Right upright

assembly (4&8).

STEP 11

Attach one Hanging bolt (33) to the Heavy bag support frame (13) using one Washer

(58) and one Lock nut (62).

Install the Heavy bag support frame (13) to the Back pad support frame (12) using

one Hex bolt (30), 2 Washers (58) and one lock nut (62).

Connect the Heavy bag support frame (13) to the Upright cross frame (5) using 2 Hex

bolts (47), 2 Washers (58), 2 Washers (57) and 2 Lock nuts (62).

Tighten the three bolts and nuts used in this step.

Tighten all nuts and bolts securely with wrenches (from step 1 to step9).

SEE PAGE 15 FOR DIAGRAM

Содержание 522NWG
















Результаты поиска

Содержание 522NWG

Отзывы:

Похожие инструкции для 522NWG

Бренды по названию

Популярные бренды

TKO 522NWG, Руководство пользователя

Результаты поиска

Содержание 522NWG

Отзывы:

Похожие инструкции для 522NWG

Бренды по названию

Популярные бренды