Our Brands:
FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | [email protected] | tkhsecurity.com
Meridiaan 32
2801 DA, Gouda
The Netherlands
PD900/PD910/PD920
January 4, 2021
Installation ManualPD900/PD910/PD920
Page 27
If you now enter the admin username and password in here, this will allow SDM2 to automatically
connect to the device.
6.3 Get Access via Web Browser
The camera should be fully accessible without the need of installing extra plugins or add-ons. You
can open the camera web pages with any modern web browser, such as Microsoft Edge (the latest
Chrome based version), Google Chrome, Mozilla Firefox, Opera, Safari, etc. For safety reasons,
this is the recommended way of working.
Sometimes you may notice that the web page implementation of the camera still requires its old-
school and unsafe ActiveX control. The camera is still prepared for browsers that use ActiveX (i.e.
Internet Explorer 11). Although not recommended to do this, for security reasons, you can still use
this ActiveX driven web page content from the camera. To do this, either use Microsoft Edge in
Compatibility mode, or use Internet Explorer 11 (which is now obsolete but may still be found in
Windows 10). The camera web page will then try to install the ActiveX control called Siqura Viewer
(or SiquraSecurity in the 1000/2000 series). Install this control, then allow using this in the browser.
The 900-series cameras main web page is shown in Figure 1 900-series cameras main web page.
Zoom and focus adjustment
After accessing the camera, the live image will be displayed on the home page.
If needed, use the zoom and focus function buttons on the home page to adjust the zoom and focus
settings of the camera. For more information about the function buttons, refer to the user manual.
Note:
Username and password are case sensitive. For security reasons, it is strongly advised to
change the administrator password. Refer to the user manual for more details.
