manualshive.com logo in svg

TKH security BC820v2, Руководство по установке

Поделиться
Скачать
TKH security BC820v2 Скачать руководство пользователя страница 20

6

Access the camera

The webpages of the BC820v2 offer a user-friendly interface for configuring the settings of the
unit and viewing live video images over the network. This chapter explains how to connect to
the built-in web server.

In This Chapter

6.1 System requirements............................................................................................ 20

6.2 Connect via web browser....................................................................................... 21

6.3 Find the unit with Device Manager...........................................................................21

6.4 Change network settings with Device Manager..........................................................22

6.5 Log on to the unit................................................................................................. 23

6.6 Install Viewer....................................................................................................... 24

6.7 Focus adjustment..................................................................................................25

6.8 System compatibility............................................................................................. 25

6.1

System requirements

You can log on to the web interface of your BC820v2 unit from a PC which is on the same
subnet as the unit. The browsing PC must meet the system requirements given in the table
below and the browser must support ActiveX controls. Make sure that your PC has a good
network connection.  

Item

System requirement

Personal computer

Minimum

1. Intel

®

 Core™ i5-2430M @ 2.4 GHz

2. 4 GB RAM

Recommended

1. Intel

®

 Core™ i7-870 @ 2.93 GHz

2. 8 GB RAM

Operating system

Windows 7 or higher

Web browser

Internet Explorer

Network card

10Base-T (10 Mbps), 100Base-TX (100 Mbps) or 1000Base-T
(1000 Mbps) operation

Viewer

ActiveX control plug-in for Microsoft IE

 20 

Содержание BC820v2






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды