-3-
-2-
The on/off knob allows the user
- Turn on or off the load attached
- Include or exclude the switch from the Z-Wave system
Programming
Configuration
Parameter
Function
Size
(Byte)
Value
Unit
Default
Description
1
2
1
1
Change the state
of indicator light
Memory function
1
1
0-1
0-1
Default status of socket
LED is on as indicator
when the load is off
Default with memory: the
socket status is same as
before when power on
to
3
Edge or Pulse
mode or Edge-
Toggle mode
1:Edge mode
2:Pulse mode
3:Edge-toggle mode
1
1-3
3
Product size (mm)
2. There are one groups for the switch
Each group can associate max five devices.
ID is excluded
1.The switch is not
connected to the
power
The
switch
isn’t working
and LED off
The switch LED illuminating,but
can not control the On/Off switch
of the load attached
The switch LED illuminating,but
the controler can not control the
switch
Group 1:lifeline
(Profile MSB=0x00,Profile LSB=0x01)
Set the On/Off
switch of the load
attached to on
On/Off
4
Invert switch
In the edge mode
invert switch
1
0-1
0
Supported Command Class
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_DEVICE_RESET_LOCALLY,
COMMAND_CLASS_SWITCH_BINARY,
COMMAND_CLASS_BASIC,
COMMAND_CLASS_SWITCH_ALL,
COMMAND_CLASS_CONFIGURATION,
COMMAND_CLASS_SCENE_ACTIVATION,
COMMAND_CLASS_SCENE_ACTUATOR_CONF,
COMMAND_CLASS_MULTI_CHANNEL_V3,
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
