6. Remote controls send signals to static controllers to trigger scenes or other actions
7. Remote controls control other actuators.
There are two different role a controller can have. There is always one single primary controller that is managing the
network and including/excluding devices. The controller may have other functions - like control buttons - as well. All other
controllers don't manage the network itself but can control other devices. They are called secondary controllers. The
image also shows that its not possible to operate a sensor just from a remote control. Sensors only communicate with
static controllers.
Product description
The TKB TZ67 is a dimmer plug that can be placed between a wall outlet for Schuko Plug and electric
devices, plugged in by cord. It can dim resistive loads up to 300 W. The device is IP 20 rated and can
therefore only be used in dry environments. For dimming the devices apply leading edge phase cutting. It is
therefore only possible to dim incandescent lamps and high voltage halogen lights. Low voltage halogen
lights, LEDs and CFLs must not be attached. Dimming is controlled wirelessly using Z-Wave or locally
applying a button. A blue LED indicates the dimming status.
Before Device is installed
Please read carefully the enclosed user manual before installation of the radio-actuator, in order to ensure
an error-free functioning.
ATTENTION: only authorized technicians under consideration of the country-specific installation
guidelines/norms may do works with 230?Volt mains power. Prior to the assembly of the product, the
voltage network has to be switched off and ensured against re-switching.
The product is permitted only for proper use as specified in the user manual. Any kind of guarantee claim
has to be forfeited if changes, modifications or painting are undertaken. The product must be checked for
damages immediately after unpacking. In the case of damages, the product must not be operated in any
case. If a danger-free operation of the equipment cannot be assured, the voltage supply has to be
interrupted immediately and the equipment has to be protected from unintended operation.
Installation Guidelines
The Dimmer Plug can be plugged into every British wall outlet for Plug-Type G. It is IP20 rated and can
therefore only be used in dry environments. Do not locate the device facing direct sunlight, humid or dusty
place. The suitable ambient temperature for the device is 0°C ~ 40°C.
Behavior within the Z-Wave network
I
On factory default the device does not belong to any Z-Wave network. The device needs to join an
existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also leave a network. This process is called Exclusion. Both processes are initiated by the
primary controller of the Z-Wave network. This controller will be turned into exclusion respective inclusion
(c) 2016 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 2
