background image

5. Preferred method of shipping.

REMEMBER 

 You own the best. If repairs are needed, use 

only purchased parts from authorized       distributors. 

3. ASSEMBLING INSTRUCTIONS

UNPACKING

1. Remove the unit and all components from its shipping crate. You will see:

Preassembled Plate Compactor

FINAL ASSEMBLING 

       

Plate  Compactors  are  shipped  completely  assembled  almost  for  immediate  use,  just 

lubricants and oil are needed to start the engine. 

Note: All installation hardware  must be inserted into its  respective location on the 
equipment, see parts explosion for more details. 

1. Using appropriated equipment, bring the unit to the ground from its shipping pallet.

Warning: failure to use proper lifting equipment could cause 
the equipment to fall and cause serious injury.

  

4. SAFETY PRECAUTIONS

READ AND STUDY THE FOLLOWING SAFETY INFORMATION BEFORE ATTEMPTING TO OPERATE THIS 
EQUIPMENT.  IN  ADDITION,  ENSURE  THAT  EVERY  INDIVIDUAL  WHO  OPERATES  OR  WORKS  WITH 
THIS EQUIPMENT IS FAMILIAR WITH THESE SAFETY PRECAUTIONS. 

WARNING - LETHAL EXHAUST GAS! 

An  internal  combustion  engine  discharges  carbon  monoxide,  which  is  a  poisonous  and  odorless 
invisible  gas.  Death  or  serious  illness  may  result  if  inhaled.  Operate  only  in  an  area  with  good 
ventilation, 

NEVER IN A CONFINED AREA!

 

WARNING - DANGEROUS FUELS! 

Use extreme caution when storing, handling and using fuels - they are highly volatile and explosive in 
the vapor state. Do not add fuel while engine is running. Stop and cool the engine before adding fuel. 

DO NOT SMOKE WHEN REFUELING! 
SAFETY GUARDS 

It is the owner's responsibility to ensure 

ALL GUARDS AND SHIELDS

 are in place and in working order. 

Discount-Equipment.com

Содержание MVP-90



















Отзывы: