CARE & INSTRUCTION MANUAL
Product:
Awning
Vehicle:
Generic
Part No.
620RTA140 / 620RTA200 / 620RTA250
File No. NPFI-001 rev1
Page 6 of 6
Date: 20/03/2020
e)
Release both vertical poles in front extrusion &
to desire height by twisting inner (smaller) pole
& lock in place.
f)
Extend horizontal pole so pins on ends of pole,
insert into holes in front extrusion & lock in
place.
g)
Attach velcro straps on side of awning by
wrapping velcro strap around horizontal poles.
h)
Insert pegs into ground on either side of
awning.
i)
Attached guy rope to front extrusion & peg &
adjust tension.
j)
Reverse steps when stowing.
Note:
It is recommended in the event of rain, adjust awning to appropriate height to allow water to run
off & not pool on top of awning.