![background image](http://html1.mh-extra.com/html/tjm/070sb13f69g/070sb13f69g_fitting-instructions-manual_1120897012.webp)
FITTING INSTRUCTIONS
Product:
Outback & Fleet Frontal Protection System
Vehicle:
Toyota 70 Series 09+
Part No.
Ente 070SB13F69G 070SB13L69G 070SB13O69G 070SB15W69G 070SB15Z69G
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
File: 88700
Page 12 of 12
22/08/2017
Step 37 only applies if a Deluxe FPS
is being fitted. If fitting a Fleet FPS,
please proceed to Step 38.
37. Place the guard in position (as shown)
and secure it place through the
indicated positions into the captive
nuts using M6 x 1.0 x 20mm bolts, M6
x Ø12.5mm flat washers and M6
spring washers.
38. Connect all wiring looms to the
relevant light assemblies. Place the
winch slot cover in place in the winch
viewing hole.
39. Ensure that all fasteners are tightened
to the appropriate tensions and that,
as a result of fitting the FPS, no
vehicle components are crushed or
will chafe
40. Check the operation of the indicators,
park lights, and winch (if installed) to
ensure that they are functioning
correctly.
070SB13L69G SHOWN