ASSEMBLY
Fasten the (4) side panels together using a drill with 1/4” nut runner
bit and a 11/32” nut driver or wrench to hold nut on inside, install (5)
of the 3/8” X 8-32 stainless bolts and nuts down each corner.
Locate the (4) feet and form the tabs on the feet as shown. The tabs should be formed up
and should be about 90 degrees from the base foot.
Locate the bottom of the Burning Box by identifying the mounting holes for the feet. Position the Burning Box with the bottom
side of the Box facing up as shown. Position the feet and mount them in place.
Locate the (4) Burning Material Support Brackets and form the tabs using a pliers as shown. Install the first (2) support brackets
into the Box as shown using the holes furthest away from the feet. The (2) brackets are to be mounted side by side from each
other and run parallel across the box.
