38 · www.tjep.eu
5.2. WARNING:
When the main switch is set to
1, do not place your fingers near
the curl guide or other moving
parts of the machine!
Avoid switching the main switch repeat-
edly between 1 and 0. This can cause a
machine breakdown.
Do not touch the wire while the machine
is running.
5.3. Insert the battery in the machine,
and set the main switch to 1.
5.4. Release the trigger lock, before
starting to tie.
5.5. How to replace the wire
coil.
WARNING:
5.5.1. Set the main switch to 0
position, activate the trigger
lock and remove the battery.
Battery
Battery
x
Trigger lock
5.5.2. Push the release lever until it is
caught by the release stopper.
5.5.3. Remove the wire coil.
5.5.4. Push the reel stopper to release
the reel stay and open it at the same
time, and remove the wire coil.
5.5.5. Load new wire coil and repeat
from step 5.1.4.
6.1. This torque dial adjusts the tension
of the ties. For higher tension, turn the
dial clockwise and for lower tension
turn the dial anti-clockwise.
6.2. Perform a test tie, to check if the
torque dial is set correctly.
!
Wire
Wire guide
x
!
Release stopper
Release lever
Reel stay
Reel stopper
