◎
Retraction
1
.
Disassemble and shrink up the pole.
2
.
Collect the cover shape between the upper cap and lower part,fasten the switch on
the both side.
3
.
Turn over the machine,collect the cable on the bottom.
4
.
Mount the pole on the bottom clips.
Warm prompt:
Electronic control dryer,if
the remote controller un-
available,Can be started
the machine with theem-
ergency switch on the
bottom of the dryer.
●
Clean the machine
1. Clean the machine follow instruction of below image.
2. Cut off the power and when the machine cool down when cleaning.
3. Must be cleared surface besmirch, avoid cause discoloration and broken.
4. Load up all the part into the packing after cleaning.
5. Storage in the place without moisture.
6. Only the surface cleaning need to be done.
7. Wipe the machine with the detergent.
8. Do not spray the water to the machine.
9. Please do not use thinner, toluene, acidic detergent, oil, alcohol, or chemicals to clean.
◎
Maintaining & Storage
◎
Declaration of hazardous substances
Above table made by SJ/T11364 standard
○ :Stand for the volume of harmful substance suitable for GB/T 26572 standard.
× :Stand for the volume of harmful substance over GB/T 26572 standard limit.
Note: All parts marked with “×” means that some hazardous substances exceed the standard, since the
limited current technology level of the industry cannot provide a replacement or reduction for the present.
◎
Environmental protection use period
The number of years marked in this label is based on the SJ/T 11364 Marking for the
Restricted Use of Hazardous Substances in Electronic and Electrical Products, and is
applicable to “Environmental Protection Use Period” for imported electronic and electrical
products manufactured in the territory of the People’s Republic of China (except for
Taiwan, Hong Kong, and Macao).
In the context of complying with “Attentions” for the safety and usage of the product in
“Instruction for Use”, without other exemptions specified by laws and regulations, and
within the above-mentioned years from the date of production, the hazardous substances
in this product will not leak or mutate, and the use of this product will not cause serious
pollution to the environment or serious damage to the body and property of the user.
The “Environmental Protection Use Period” shall not be regarded as the “Safe Use Period”,
and especially shall not be regarded as the service life set for factors such as safety of
electrical performance and safety of electromagnetism.
If the product is to be discarded after proper use, it is suggested that this should to be
handled according to the laws and regulations for the recycling and reuse of electronic
and electrical products.
◎
Warm prompt
Dear customer, in order to make sure that you can be safe and comfortable to use this
product, please note the following before using.
1. To avoid fire, before use, please check your electrical socket is safe and reliable,
whether to meet AC220V through more than 10 a current.
2. In order to ensure the machine has the best performance, please regular cleaning
machine inlet filter (usually use 5 days clean once).
3. Please read the instructions before use, if you have questions, please contact the
seller or the manufacturer of professionals.
◎
Special statement
1. This manual carefully checked, if there are any printing or the errors in the content,
the company reserves the power of interpretation.
2. If this product have any technology change in the future, without prior notice2.
3. Product appearance or color changes, if any, please in kind prevail.
4. Machines have QC lable on screw hole at the bottom, if any man-made damage or
tear for the lable, this product can not enjoy free warranty service.
-5-
-6-
