13 – ENGLISH
If you make a mistake at any point in the process, press the Back button on the remote and
begin again.
Power Loss: Should power be lost, or the Albergo becomes disconnected, the alarm
time will be saved but the Albergo alarm cannot sound if there is no power.
Alarm Options
When the alarm sounds you can activate the Snooze feature or shut the alarm off.
Snooze: To activate Snooze while the alarm is sounding, press the Snooze button on the
remote, or briefly press the Multi-Function Control Wheel on top of the unit. The Snooze
time is not adjustable. Pressing the Snooze button again while still in Snooze mode will
re-set the Snooze timer back to 10 minutes. While the alarm is sounding, press and hold
down the Snooze top wheel to turn off the alarm and the unit, or press the respective
alarm button.
Alarm off: To stop the alarm while it is sounding, press the Alarm button on the unit or
remote, or press and hold the Multi-Function Control Wheel on top of the unit. You can
also press the Power button on the remote.
Alarm Quick Set: With the Albergo in Standby, repeatedly press the alarm button on the
remote briefly to toggle each alarm on or off.
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is
not connected to any other Bluetooth product. Devices may pair differently. Below is a
general guide.
1.
Press the Albergo's front panel Bluetooth button or change the source to Bluetooth.
This will power on the
Bluetooth. Turn the volume up about ¼ to start. Also turn up the
volume on the source device (the device you are streaming from).
2.
Turn on the Bluetooth wireless technology on your enabled device.
3.
Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to
initiate searching. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli
Bluetooth” will change from “Not Paired” to “Connected”.
4.
You will hear a ring tone from the Albergo confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should
not have to pair your device again.
Depending on your device, you may need to
make multiple attempts at Pairing and/or Connecting to the Albergo, but please
give your device adequate time to Pair or Connect before repeating the process.
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod Touch/iPad
1.
Press the Albergo's front panel Bluetooth button or change the source to Bluetooth.
This will power on the Bluetooth. Turn the volume up about ¼ to start. Also turn up the
volume on the source device (the device you are streaming from).
2.
Select “Settings” (depending on software version).
Содержание Albergo
Страница 1: ...OWNER S MANUAL AM FM Clock Radio...
