www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458
Copyright © 2020 Tivoli 05.20.20
ADNM-DTV Flicker-Free TV Studio Camera Installation Instructions
7170445
Page 3 of 8
720D Driver Connections
M
LINEARdrive 720D
12-28V / 24W Direct voltage controlled LED driver
TC
Group 1
Group 1 GND
Group 2
Group 2 GND
Group 3
Group 3 GND
Group 4
Group 4 GND
Ext in +
Ext in
-
DMX in +
DMX in -
LedSync out +
LedSync out -
LedSync shield
DA -
DA +
DA -
DA +
Ext in +
Ext in -
DA +
DA -
DA +
DA -
DMX in +
DMX -
DMX in shield
LedSync out +
LedSync -
LedSync shield
Channel 1, Red
Power
Channel 2, Green
Power
Channel 3, Blue
Power
Channel 4, White
Power
M
LINEARdrive 720D
12-28V / 24W Direct voltage controlled LED driver
TC
Group 1
Group 1 GND
Group 2
Group 2 GND
Group 3
Group 3 GND
Group 4
Group 4 GND
Ext in +
Ext in
-
DMX in +
DMX in -
LedSync out +
LedSync out -
LedSync shield
DA -
DA +
DA -
DA +
Ext in +
Ext in -
DA +
DA -
DA +
DA -
DMX in +
DMX -
DMX in shield
LedSync out +
LedSync -
LedSync shield
Channel 1, Red
Power
Channel 2, Green
Power
Channel 3, Blue
Power
Channel 4, White
Power
12V-48V DC IN
To connect the driver to a 12-48V DC power supply, connect
the power supply positive voltage supply wire to the VDC+
connector and the negative voltage supply wire to the VDC-
connector. The driver and LEDs can use the same power
supply.
EXT in
Connect an external control device to the driver’s Ext in+
and Ext in- connectors. Configure the driver for use with as
external control device over the 3-button user interface.
DA+ / DA-
Use these connectors to connect the driver to a DALI network.
Always combine a DA+ and a DA- connector for either data
input or data output.
DMX in/LEDSync out
Use these connectors when the driver is used in a DMX
network.
For DMX in, connect the network cable’s DMX+, DMX- and
DMX shielding wire (the orange/white, orange and brown wire
in a CAT5 cable) to the DMX in+, DMXin-, and DMX in shield
connector respectively.
For LEDSync out, connect the network cable’s data+, data-
and shielding wire to the LEDSync out+, LEDSync out- and
LEDSync shield connector respectively.
LED Lighting
Indicates the location of the connectors for your LED lighting.
Red represents channel 1, Green represents channel 2, Blue
represents channel 3 and White represents channel 4. The
default group color allocation can be changed over the 3
button user interface.
