TiVo THR22-100, Руководство для пользователя, Страница: 6 / 143

iv
airflow to the unit could impair performance or damage your
DVR and other components.
• Do not stack electronic components or other objects on top of the
DVR. Also, do not stack the DVR on top of a “hot component”
such as an audio power amplifier.
• Protect your components from power surges by connecting all the
components before plugging any power cords into the wall outlet.
Use of a surge protector is also recommended.
• Don’t overload power outlets or extension cords, which can result
in the risk of fire or shock. It’s also important to use only the type
of power source indicated on the marking label or in this manual.
• Avoid audio hum or interference by inserting all cable plugs
firmly into their jacks. Also, place Audio/Video (A/V) cables to
the sides of the TV back panel rather than down the middle once
connected. Try not to coil any twin-lead cables and keep them
away from A/V cables as much as possible.
• Never insert objects of any kind into any openings in the DVR
(other than the DIRECTV
®
Access Card as detailed in this
manual).
• Place it on a flat, hard surface — do not operate the DVR on a
carpet or other padded surface.
• Always unplug your DVR before moving it.
• Always unplug the DVR, TV and other equipment before you
connect or disconnect any cables.
• The only way to disconnect the DVR from the power supply is to
remove the power cord. The DVR must therefore be installed next
to the power point which must be easily accessible.
• CAUTION: Electric Shock — never attempt to disassemble the
DVR yourself; always take it to a qualified service person when
repair is required. Opening or removing covers may expose
dangerous voltage or other risks, and incorrect reassembly can
cause shock when the DVR is subsequently used. Attempted self-
repair may also void your warranty. Changes or modifications not
expressly approved by the party responsible for compliance (by
the warranty or by the manufacturer) could void the user’s
authority to operate the equipment.
• Do not drop your DVR and always move it with care.
• Have your DVR professionally serviced (do not attempt to service
it yourself).
• Any changes or modifications in construction of this device which
are not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
• If you move your DVR between locations at different
temperatures, allow it to reach room temperature before you apply
power to it.
• Do not pick up or otherwise move your DVR while it is connected
to the AC power supply. If you want to move your set-top box,
first disconnect it, then wait at least 30 seconds before continuing