25
necessary to run every frequency at the highest possible volume
to have great benefit from PEMF.
Troubleshooting and Service
System quickly goes into Overheat Protect mode (right LED).
■
Check there is no blockage of the rear cooling fan and the chas-
sis is at least 1” from any wall.
■
Check the intensity setting and turn down.
GREEN LED (Signal Type) is not lighting.
■
If this LED is not lit when you’re sure you’re running a signal to
the ELEMENT Elite (just plug a set of earbuds into the
1
/
8
” audio
input socket to confirm), first turn up your volume control. At
frequencies above 10,000 Hz, this LED might not light up when
the volume is too low. If there is high frequency material in the
middle of a program, the light may go out during that time, but
you will still be getting a magnetic field in the coil.
Chassis makes loud humming sound when turned on.
■
This is caused by “dirty” AC power. Try a different outlet.
Try a different time of day. If it does not clear up, consult an
electrician to install a filter on the electrical circuit.
For service and support, call 425.343.7976
Limited Lifetime Warranty
The ELEMENT Elite system, chassis and coils, are warranted
against manufacturing defects for the life of the equipment
and does not cover normal wear and tear. Warranty repairs or
replacement will be at the discretion of Tiverton. All repairs must
be provided by a qualified Tiverton Audio service provider or the
manufacturer. After the first year, shipping costs, to and from the
repair provider, will be the responsibility of the purchaser. Misuse
of the ELEMENT Elite system voids the warranty.
