Titon CME1, Руководство по эксплуатации продукта

Страница: 9 / 28

9
Installation
Transportation, Packaging & Storage
Great care should be taken when transporting the appliance, DO NOT drop as
damage may occur.
The unit must always be stored in a clean and dry environment.
Remove all packaging before installation but leaving duct port covers/bungs in
place (if fi tted) until connecting ducting.
Inspection
Inspect the appliance for damage.
Check all accessories have been supplied.
•
•
•
•
•
Parts List
CME1 Unit x 1.
Port covers x 3.
Product manual x 1.
•
•
•
CME1 Screw Pack x 1. •
All shortages or damage must be reported to the supplier.
Preparation
Important: read these instructions fully before the installation of this appliance
NEVER install the CME1 in an area which does not have suffi cient access the for
future maintenance (see Dimensions) , or ‘box-in’ the unit, as the area may subse-
quently surface fi nished making access to the unit diffi cult.
NEVER install the appliance in an environment which contains:
Excessive oil or a grease laden environment.
Hazardous gases, liquids or vapours that are fl ammable or corrosive.
Ambient temperatures above 40°C or below -5°C.
Humidity levels above 90% or a wet environment.
•
•
-
-
-
-
Online Version