TiTLEY Scientific TC2201NA, Руководство пользователя

Страница: 8 / 15

ES-­‐8
3. 4 Digits Display
4. Image Resolution Select
5. Movie Recording
6. Camera Delay Setting
7. SD Card
The setting of this camera is very easy. Turn on the unit and then press the
͞ SETUP ͟ button, the
icon will start to blink from ͞ DATE ͟ , press ͞ UP ͟ or ͞ DOWN ͟ to the next setup item. Press ͞ OK ͟
button to enter the specific menu items which is blinking. After the setting is done, press ͞ SETUP ͟
to save and exit the menu setting status.
6.1 Set Camera Delay
Camera Delay is to set the amount of preset time in minutes and seconds the camera will sleep
between PIR triggering. This setting ranges from 5~ 60 seconds, 1~ 60mins. Default delay is 1
minute.
a)
dƵƌŶŽŶƚŚĞƵŶŝƚĂŶĚƚŚĞŶƉƌĞƐƐƚŚĞ͞^dhW͟ďƵƚƚŽŶ
b) The menu icon will start to blink, press the ͞ UP ͟ or ͞ DOWN ͟ button till icon 6 ͞ Camera Delay
Setting ͟ is blinking, press ͞ OK ͟ to enter.
c) Then the LCD will display ͞ 0100 ͟ , first two digits represents minutes and last two digits
represents seconds.
d) When the cursor stays at minutes, press ͞ UP ͟ and ͞ DOWN ͟ to change the value (Range from
00-­‐60, step 1), press ͞ OK ͟ to confirm.
e) Then it enters the second setting. press ͞ UP ͟ and ͞ DOWN ͟ to change the value (Range from
05-­‐59, step 1), press ͞ OK ͟ to confirm.
f) Then it comes to the next setting item. If the setting is done, press ͞ SETUP ͟ to save and exit
the setting.
6.2 Set Camera State and Photo Resolution
To set the number of pictures or movie the camera will take per PIR triggering. The user can
choose 1P, 3P or movie mode.
a)
dƵƌŶŽŶƚŚĞƵŶŝƚĂŶĚƚŚĞŶƉƌĞƐƐƚŚĞ͞^dhW͟ďƵƚƚŽŶ
b) The menu icon will start to blink, press the ͞ UP ͟ or ͞ DOWN ͟ button till icon 4,5 is blinking,
press ͞ OK ͟ to enter.
c) Press the ͞ UP ͟ or ͞ DOWN ͟ button to select picture or movie.
d) If selecting the ͞ Picture ͟ mode, press ͞ OK ͟ , the LCD will display ͞ 1P ͟ (shot 1 photo a time) or
͞ 3P ͟ (shot 3 photos a time), press ͞ UP ͟ or ͞ DOWN ͟ to select and press ͞ OK ͟ to confirm.
e) Then the LCD will display ͞ LoHi ͟ which comes to setting the image resolution. ͞ Lo ͟