EN
Routing the diagonal and lap belts correctly
Make sure there is no twist of car belt. Route the diagonal belt on the
shoulder of your child and lap belt under the armrest of car seat on one
side. (fig 1 & 2) Make sure lap belt must go under armrest,diagonal belt
must over the upper armrest. Check and make sure there is no twist of the
belt. Insert the metal tongue of carbelt into the carseat buckle until you
hear a clear “click”. (fig.4)
Warning! Make sure your child arms are above both diagonal and lap
belt. (fig.5)
How to use isofix
Push Isofix connector to the fixed point on the car till hear the crisp
voice “click” (fig.3), the button turns to green, then push forward to the
baby car seat to see if it is fixed strongh enough and whether it is close to
the rear seat back of the car. (fig.3)
Shake the seat to see if it is fixed strong enough and whether the Isofix
connector falls off. Please follow below procedure install again.(fig.3)
Press Isofix release button, the Isofix system can be released. (fig.3)
1
2
1
8
7
click
！
9
Figure 3
Figure 4
Figure 5
Figure 1
Figure 2
