EN
26
27
Installing in vehicle
NOTE!
lf your vehicle does not have an I-Size seating position, please
check the vehicle type list that is included.
• Please select an appropriate seat in the vehicle
• Unfold the supportleg (1) until locks
• Pull the ISOFIX EXTENT strap (8a) under the seat body, and the both ISOFIX
connectors (3) will extend automatically.
• The safety indicator must be clearly visible on both ISOFIX release
buttons.
• Push the seat in the direction to the backrest until it is fully aligned with
the backrest. Latch both ISOFIX attachments with the corresponding
ISOFIX lower anchorage, when you hear a “click” means that the ISOFIX
attachments and the ISOFIX lower anchorage are all latched completely.
Meanwhile the ISOFIX latching indications (5) shows green. Now the
installation of the ISOFIX attachments is finished. Make sure no spaces
between the car seat and the vehicle backrest. Pull the extensions straps
(8a) and push seat body to make sure the base stands firmly against
backrest of car seat.
• NOTE!
The ISOFIX anchorage (7) points are two metal lugs per seat and
are located between the backrest and the seat of the car. If you are in any
doubt, consult your car’s instruction manual for assistance.
• If the ISOFIX anchorage points in your car are difficult to access, you
should use the connect guides provided in order to avoid damaging the
cover.
1
3
5
7
A8
