USB-2COM-BB Dual RS-232/USB/Micro SD Cape for BeagleBone Black & BeagleBone
9
7.
Use a USB keyboard to key-in the command under “Terminal” program to find the available
serial ports. Most likely, the Angstrom Linux will support two serial ports of USB-2COM-BB with
ttyUSB0 and ttyUSB1:
Key-in the following commands to check the two serial ports
# stty –F /dev/ttyUSB0
# stty –F /dev/ttyUSB1
If two serial ports of USB-2COM-BB are available, the response is similar to
Speed 9600 baud; line = 0;
-brkint –imaxbel
BeagleBone
1.
Connect the USB cable of BeagleBone to a computer with Windows O.S. Make sure your
computer has Internet connection.
In Windows 8, 7, Server 2008 R2 O.S system, your system will load and install the drivers for
BeagleBone automatically.
In Windows Vista, XP, Server 2003 and 2008 O.S system, when asked to install drivers please
allow Windows to search the Internet. Wait, and the system will load and install the drivers
automatically.
2.
You will find a console port “USB Serial Port (COMx) ” under Device Manager of the System
Properties screen. Go there by Start- Setting-Control Panel- System Properties – Hardware -
Device- Device Manager.
3.
Use a “Terminal Emulator” program to open this console port with 115,200 bps baud rate, 8
